Add page on Tower Strips / Ozstrips to Controller Skills

docs/controller-skills/towerstrips.md

@@ -0,0 +1,116 @@
+---
+title: Tower Strips
+---
+
+--8<-- "includes/abbreviations.md"
+
+In the real world, aerodrome controllers use strips to provide a visual representation of aerodrome activity, beyond what looking out the window or at a radar screen can provide.
+
+Within vatSys, this can be emulated using the OzStrips plugin. Strip state is shared between controllers operating at the same aerodrome.
+
+## Setup
+
+The OzStrips plugin can be downloaded using the [vatSys Plugin Manager](https://github.com/badvectors/PluginManager){target=new}.  
+
+If the client is installed correctly, there will be an *OzStrips* option in the Window dropdown menu.
+
+<figure markdown>
+![OzStrips Dropdown](../controller-skills/img/ozstripsdropdown.png){ width="700" }
+</figure>
+
+## Usage
+
+After logging onto the network, open the plugin from the dropdown menu, and select the desired aerodrome, or type the ICAO code into the text field.
+
+<figure markdown>
+![Select Aerodrome](../controller-skills/img/ozstripsaerodromeselect.png){ width="700" }
+</figure>
+
+A connection attempt will be made, and after roughly 10 seconds if it is successful, the *CONN STAT* field in the Control Bar will turn green.
+
+### Stripboard
+
+<figure markdown>
+![Stripboard](../controller-skills/img/ozstripswindow.png){ width="700" }
+</figure>
+
+The stripboard is divided into multiple bays, each representing a stage in an aircraft's flight thread.
+
+Strips can be moved in between strip bays by clicking on their callsign, and clicking the bay where you want them to go, or by clicking on the green *SID Trigger*.
+
+Selecting a track on the Ground Radar or ASD will select the relevant strip in OzStrips, and vice versa.
+
+!!! Note
+    **Strips can not be *SID triggered* from Holding Point to Runway.**
+
+    This is to prevent incidental placement onto the runway.
+
+#### Control Bar 
+
+The bottom of the window holds the Control Bar. This panel contains the server connection status, aerodrome selected and ATIS code among other elements.
+
+The *INHIBIT* and *FOR STP* button respectively remove and add selected aircraft from the strip board as required. 
+
+The *XX CROSS XX* adds a red highlight to the strip, marking its intentions to cross an active runway, rather than depart from it.
+
+The *PDC* button opens the default vatSys PDC editor. 
+
+!!! Note
+    **Currently, PDCs through OzStrips can only be sent via Private Message, not through Hoppies.**
+
+    To send a PDC through vatAcars, you'll be required to dispatch it manually.
+
+### Strips
+
+The background colour of the strip corresponds to its status as an arrival or a departure. Departing aircraft have a blue strip, while arrivals have a yellow strip.
+
+<figure markdown>
+![Strip](../controller-skills/img/ozstripstrip.png){ width="700" }
+</figure>
+
+| Number | Content | Action |
+|---------|-------------|--------------|
+| 1 | Bay Number | Change |
+| 2 | Filed Off Blocks Time | Cock Strip |
+| 3 | Aircraft Type | Open Flightplan |
+| 4 | Destination | Open Flightplan |
+| 5 | Route Indicator | Show Route |
+| 6 | Flight Rules | |
+| 7 | Correct SSR Code + Mode C Received | |
+| 8 | SSR Code | Autogenerate Code |
+| 9 | Wake Turbulence Category | |
+| 10 | Callsign | Select Strip |
+| 11 | Runway | Change |
+| 12 | Holding Point / Clearance Limit | Change |
+| 13 | SID | Move strip to next bay |
+| 14 | First Waypoint | Open flightplan |
+| 15 | Departure Heading | Change |
+| 16 | Requested Level | Open flightplan |
+| 17 | Cleared Level | Change |
+| 18 | Takeoff Timer | Start / Reset |
+| 19 | vatSys Global Ops Data | Change |
+| 20 | OzStrips Remarks | Change |
+
+### Queueing and Reordering
+
+A strip can be placed into the queue by selecting the strip and then pressing "Add to Queue". Strips can be moved vertically by pressing the keyboard arrow keys while a strip is selected.
+
+## Workload Management
+
+While the use of OzStrips can aid situational awareness, it is ideal to be used in such a manner that it doesn't negatively impact your productivity.
+
+!!! Tip
+    It is important that you communicate instructions concurrently while you move strips in OzStrips. Don't move strips before you do the action or obtain a readback, incase you get interrupted.
+
+### Cocking Strips
+
+Left clicking on the strip's EOBT will highlight and cock the strip, making it stand out. It is recommended to mark strips this way if there is an outstanding request.
+
+### Queue Management
+
+When multiple aircraft have outstanding requests, it is recommended you 'queue up' the strip, by placing it below the queue bar. This can be done quickly by selecting the strip then pressing "Add to Queue".
+
+When an aircraft is in a queue, make sure the aircraft's bay location represents its current state. 
+
+!!! Example
+    An aircraft in a queue for an airways clearance, would remain in the *Preactive* bay, below the queue bar, not in the *Cleared* bay.