The generic-seeder is a blockchain network crawler that maintains a list of IP addresses of the most reliable nodes on the network and shares those node IPs via DNS request to anyone requiring an entry point into the decentralized network. Choose between two main usage modes which consist of locally running a lightweight DNS server or feeding the data into a Cloudflare account in order to respond to DNS seed requests. If you just want to crawl a network to get a list of the connectable nodes, without worrying about the DNS setup, you can do that too. The seeder app is compatible with almost any bitcoin-based blockchain network and can be configured in a short amount of time by filling out a small handful of parameters in the configuration file with the data from your coin's network. Tested to work with Ubuntu 18.04+ and Debian 8.x+ but it should work fine on any Linux installation, although package names and install steps may differ.
- Pieter Wuille (aka sipa): for creating and continuing to support the original bitcoin-seeder
- The Litecoin Cash development team: for developing the original implementation of Cloudflare api mode
- Regularly revisits known nodes to check their availability
- Cloudflare DNS integration
- Block explorer integration (including support for a 2nd failover explorer)
- Keep a running list of all nodes in the network or only show nodes that are above a certain version
- Bans/Unlists nodes after enough failures, or bad behaviour
- Keeps statistics over (exponential) windows of 2 hours, 8 hours, 1 day and 1 week, to base decisions on
- Very low memory (a few tens of megabytes) and cpu requirements
- Run multiple crawlers at the same time (96 threads simultaneously by default)
- Force connections to IPv4 or IPv6 only if desired
- Customizable options via configuration file
Detailed set up instructions can be found in the DNS Seeder Setup Guide
sudo apt-get install git build-essential libboost-all-dev libssl-dev libcurl4-openssl-dev libconfig++-dev
git clone https://github.com/viacoin/generic-seeder.git
cd generic-seeder
cp ./settings.conf.template ./settings.conf
Make required changes in settings.conf
NOTE: Example setting files for the viacoin, bitcoin, dogecoin and exor networks are also provided. Copy or rename settings.conf.bitcoin, settings.conf.dogecoin or settings.conf.exor to settings.conf and test crawling any of these networks with working examples to better understand how to set up the config for your own network.
make
This will produce the dnsseed binary
The seeder app comes with a built-in DNS server which listens for DNS requests and serves results based on the IP addresses that have been crawled on your blockchain network. If, for example, you want to run a DNS seed on dnsseed.example.com, you will need an authorative NS record in example.com's domain record that points back to your server. It is required to create both an NS and an "A" record to tie everything together.
Example:
| Record Type | Name/Host | Value/Nameserver |
|---|---|---|
| A | vps | 123.231.123.231 |
| NS | dnsseed | vps.example.com |
All Ubuntu releases starting with 16.10 (first released in October 2016) come installed with systemd-resolved, which effectively prevents the seeder's built-in DNS server from working correctly. This is due to both applications requiring use of port 53, and systemd-resolved takes priority by default. There are a few ways to resolve this issue:
- ✅ Force the seeder to bind to a specific IP address by adding the following argument to the terminal cmd:
-a <ip address>. This is the recommended solution as it doesn't require disabling of any operating system services.
Example:
sudo ./dnsseed -h dnsseed.example.com -n vps.example.com -a 123.231.123.231
⚠️ Disable binding of systemd-resolved to port 53 by editing the/etc/systemd/resolved.conffile and adding this line to the bottom of the file:
DNSStubListener=no
Save and reboot, and now systemd-resolved will no longer interfere with the seeder's DNS server.
NOTE: This method is only supported by systemd 232 and newer. You can check your version of systemd with the cmd: systemctl --version
⚠️ Completely disable the systemd-resolved service with the following cmds (not recommended as it may cause undesired side-effects if you use the same server for anything other than running the seeder app):
sudo systemctl disable systemd-resolved
sudo systemctl stop systemd-resolved
You can now run the seeder app on the vps.example.com system using the following terminal cmd (must be run with root permissions or the DNS server will not be able to listen for and respond to requests properly):
sudo ./dnsseed -h dnsseed.example.com -n vps.example.com
If you want the DNS server to report SOA records, you must provide an email address using the -m argument:
./dnsseed -h dnsseed.example.com -n vps.example.com -m [email protected]
Because non-root users cannot access ports below 1024, an extra step is required to allow you to run the DNS server (which must always use port 53) without root privileges. There are two known options for running the seeder app using a non-root user account:
- The first non-root method is to use the
setcapcommand to change the capabilities of thednsseedbinary file to specifically allow the app to bind to a port less than 1024 (this one-time cmd requires root privileges):
sudo setcap 'cap_net_bind_service=+ep' /path/to/dnsseed
Once the setcap command is complete, you can start the seeder app as per normal, without the need for sudo:
./dnsseed -h dnsseed.example.com -n vps.example.com -m [email protected]
- The second non-root method is to add a redirect entry for port 53 in the iptables firewall system before running the seeder app as a non-root user (this one-time cmd requires root privileges):
sudo iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to-port 15353
After adding the new iptables rule, the seeder app can be called without sudo, but you must always specify the redirected port using the -p argument:
./dnsseed -h dnsseed.example.com -n vps.example.com -m [email protected] -p 15353
Instead of using the DNS seeder app to run your own DNS server, you can alternatively utilize a free Cloudflare account to host the list of good nodes from your blockchain network. Extra setup is required before Cloudflare mode will work properly. Python 3+ and the Cloudflare Python API must be installed. Run the following cmds in the terminal, one line at a time:
sudo apt-get install python3 python3-pip
sudo pip3 install cloudflare
You must also fill in the Cloudflare API config section at the bottom of the settings.conf file.
Example:
cf_domain="example.com"
cf_domain_prefix="dnsseed"
cf_username="your_cloudflare_username"
cf_api_key="your_cloudflare_api_key"
cf_seed_dump="dnsseed.dump"
Run the seeder without the need to specify any additional options:
./dnsseed
Let the seeder app run for a few minutes until a dnsseed.dump file is generated, and then you can test Cloudflare mode:
cd /path/to/seeder/cf-uploader && python3 seeder.py
Assuming no errors were reported, you can check that your seeder domain is working properly by running the following cmd in the format nslookup {cf_domain_prefix}.{cf_domain}:
nslookup dnsseed.example.com
If everything is working correctly, you will see a number of "Name:" and "Address:" lines near the end of the output:
Example:
Server: 2001:19f1:300:1702::3
Address: 2001:19f1:300:1702::3#53
Non-authoritative answer:
Name: dnsseed.example.com
Address: 158.203.13.138
Name: dnsseed.example.com
Address: 44.76.38.113
Name: dnsseed.example.com
Address: 46.76.253.117
Name: dnsseed.example.com
Address: 145.248.52.149
Name: dnsseed.example.com
Address: 82.240.23.104
Name: dnsseed.example.com
Address: 103.207.140.36
Name: dnsseed.example.com
Address: 204.222.30.68
Once configured correctly, it is recommended to set up a cron job that will automatically update the seeds list every 30 minutes or so:
*/30 * * * * cd /path/to/seeder/cf-uploader && python3 seeder.py
-
-hor--hostHostname of the DNS seed
Usage Example:
./dnsseed -h dnsseed.example.com -
-nor--nsHostname of the nameserver
Usage Example:
./dnsseed -n vps.example.com -
-mor--mboxE-Mail address reported in SOA records
Usage Example:
./dnsseed -m [email protected] -
-tor--threadsNumber of crawlers to run in parallel (default 96)
Usage Example:
./dnsseed -t 150 -
-dor--dnsthreadsNumber of DNS server threads (default 4)
Usage Example:
./dnsseed -d 10 -
-aor--addressAddress to listen on (default ::)
Usage Example:
./dnsseed -a 24.45.22.148 -
-por--portUDP port to listen on (default 53)
Usage Example:
./dnsseed -p 15353 -
-oor--onionTor proxy IP/Port
Usage Example:
./dnsseed -o 127.0.0.1:9150 -
-ior--proxyipv4IPV4 SOCKS5 proxy IP/Port
Usage Example:
./dnsseed -i 46.5.252.55:1080 -
-kor--proxyipv6IPV6 SOCKS5 proxy IP/Port
Usage Example:
./dnsseed -k [2620:0:6b0:a:250:56ff:fe99:78f7]:1234 -
-wor--filterAllow these flag combinations as filters
Usage Example:
./dnsseed -w 0x1,0x5,0x9,0xd,0x49,0x400 -
-for--forceipForce connections to nodes of a specific IP type
valid options: a = all, 4 = IPv4, 6 = IPv6 (default a)Usage Example:
./dnsseed -f 4 -
--wipebanWipe list of banned nodes
Usage Example:
./dnsseed --wipeban -
--wipeignoreWipe list of ignored nodes
Usage Example:
./dnsseed --wipeignore -
--dumpallDump all unique nodes
Usage Example:
./dnsseed --dumpall -
-?or--helpShow the help text
Usage Example:
./dnsseed -?
Need more help? Read the DNS Seeder Setup Guide