2024.11.2

Growatt:

• Corrected "Output Power" to display grid charging #1132 thanks @TonyMathiesen

SolaX AC / Hybrid:

• Added aditional long term stats #1130 thanks @TheDK
• Corrected X1-RetroFit 'PRI' to Gen3
• Corrected "Export Control User Limit" for more Inverters #1126

2024.11.1

Growatt SPH: #710 #1114 thanks @choenig & @TheEragon

• Corrected "AC Power to Grid" and L1-L3
• Corrected "AC Power to User" and L1-L3
• Corrected "House Load" L1-L3
• Fixed "Inverter Module"

SolaX Hybrid Gen5:

• Corrected "Battery 2 Temperature" #1050 #1106 thanks @rgrae81

2024.10.4

Growatt:

• Added Firmware versions 'AJ1', 'AM1' & 'V'

  Following work is thanks to @TonyMathiesen

• Added "Inverter State & "Run Mode" for TL-X MIN, TL-XH & TL3-XH #791 #1095

• Added Time Slots for Priority Setting for TL-XH & TL3-XH #1097

• Added "Grid Power Total" for TL3-XH #1098

• Corrected Battery Voltage scaling for TL-XH & TL3-XH #1099

• Fixed display of "Firmware Control Version" #1096

• Removed some sensor entities for Number and Selects #1100

2024.10.3

Docs:

• Updated Baud rate for more Inverters
• Updated Setup instructions

General:

• Option to use the built in Modbus from HA, requires a Hub setting up with at least one component (ie a single sensor) #1081 thanks @hernot

AlphaESS:

• Initial support for AlphaESS Inverters.
  Untested and will require either Firmware information or start of Serial Number to function.
  Requires further work by an AlphaESS owner to populate the missing entities.

2024.10.2

Growatt:

• Added "Active Power Limit" & "Reactive Power Limit" Numbers and corresponding button's to revert to default mode. #1088

Growatt TL3-SL:

• Initial Support for TL3-SL Inverters #1067

SolaX Boost G4 & X1 Smart:

• Added "Active Power Limit" & "MPPT Scan Mode PV1-3"

SolaX MIC G2:

• Added "Export Power Limit" #1049

2024.10.2 Beta 1

Growatt TL3-SL:

• Initial Support for TL3-SL Inverters #1067

2024.10.1

Growatt SPH:

• Changed "Grid First Battery Minimum SOC" & "Grid First Discharge Rate" to native_min_value = 0

SolaX Gen3 - Gen5:

• Added Switch "Discharge Cut Off Point Different"
• Removed Sensor "Discharge Cut Off Point Different"

SolaX Gen4 - Gen5:

• Limit No Discharge/Battery Hold to 98% SOC to avoid PV from shutting down #833 #1083 thanks @fxstein

SolaX Mic:

• Added support for Inverters with Serial MC602T, MC802T, MC803T & MC806T

Solinteg:

• Fixed individual MPPT shadow scan #1072 thanks @gec75

2024.09.5

Growatt TL3-SL: #1067

• Added Serial starting 'DHA' Untested, so don't know which Register set to use

Growatt General: #1066

• Moved Grid Export Limit, Limit Grid Export, Charger Switch to "Control"

Growatt GEN3 (MOD TL3-XH and MIN types): #1066

• Changed many entities from input register 1-124 to 3000-3124.
• Added: Multiple EPS entities, Today's Yield, Total Yield

Growatt GEN (TL3-X) non-hybrid: #1057 #1066

• Removed 3000-3124 register entities:
  • Total Forward Power
  • Total Reverse Power
  • Total Load Power
  • Today's Grid Import
  • Total Grid Import
  • Today's Grid Export
  • Total Grid Export

2024.09.4

WARNING Integration version 2024.09.x is only compatible with HA 2024.9.0 and newer

Growatt MOD TL3-XH:

• Added "EMS Discharging Stop SOC (on grid)" requires Firmware "ZBDB-0008" and above #1052 #1056

Sofar:

• Added SensorStateClass.MEASUREMENT to "Battery Charge Cycle x" #1060

SolaX:

• Added native_step = 0.1 to "Config Export Control Limit Readscale" #1062

2024.09.3

WARNING Integration version 2024.09.x is only compatible with HA 2024.9.0 and newer

General:

• Fixed "KeyError: 'support-battery'" #968 #976 #977 #1015 #1054