Skip to content

ESP32 WIFI remote controller for the Behringer Ultradrive Pro / DCX2496

License

Notifications You must be signed in to change notification settings

x3n1ty/DuinoDCX

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

DuinoDCX

ESP32 microcontroller based WIFI controller for the Behringer Ultradrive Pro / DCX2496. No wifi router or internet connection needed, no applications to install.

Disclaimer

I take no responsibility if you destroy your sound system using this.

The project is free software and there is no official support.

Demo

http://duinodcx.herokuapp.com/

Demo Video

DuinoDCX Demo Video

Development

Install Node.js, Arduino IDE and the support for the ESP32 boards.

Required parts

  • ESP32 development board
  • RS232 To TTL converter

or

Building and uploading

Run npm install to fetch dependencies.

To build the project run npm run build and then npm run dist.

The dist command will read the minified files from the build dir and then rewrites the gzipped hex payloads for the static files to DuinoDCX/StaticFiles.h file.

Open the DuinoDCX/DuinoDCX.ino Arduino sketch file using Arduino IDE. Set the Partition Scheme to Minimal SPIFFS (Large apps with OTA) and upload the project to the microcontroller.

Precompiled binaires can be uploded using the ESP32 OTAWebUpdater example or using the built in functionality after the initial installation.

Connecting to the device

The device creates a wifi network with SSID DCX2496. The default password is Ultradrive.

Connect your computer or mobile device to the network and point the browser to address http://192.168.4.1. The default username and password are DCX2496 and Ultradrive. The UI will take a few seconds to load.

If you want to make the UI available in your local network open the Wifi Setup config panel. Fill in your wifi credential and submit the form. Wifi credentials are persisted to the device memory.

If your client device supports MDNS the controller will be also available at http://ultradrive.local. You may need to add http:// to the url when using it the first time in a browser.

Security Credentials

All credentials can be changed using the UI. The defaults are defined beginning of the main sketch file. In case you forget your password short digital pin 13 to the ground for one seconds while the device is booting up. This will restore the default credentials.

Acknowledgements

Thanks to Ilkka Huhtakallio for contributing the transfer function code. Without that this project would not have all those pretty graphs.

License

MIT

About

ESP32 WIFI remote controller for the Behringer Ultradrive Pro / DCX2496

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • JavaScript 72.9%
  • C++ 25.1%
  • CSS 1.3%
  • HTML 0.7%