feat(split): wired split over serial support (WIP 2023-12-23)

app/include/zmk/split/serial/serial.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#pragma once
+
+#include <zephyr/sys/ring_buffer.h>
+
+// The serial protocol is defined for payloads of up to 254 bytes. This should
+// be large enough to ensure that one message can be fully buffered.
+#define SERIAL_BUF_SIZE 300
+
+struct serial_device {
+    const struct device *dev;
+    uint8_t rx_buf[SERIAL_BUF_SIZE], tx_buf[SERIAL_BUF_SIZE];
+    struct ring_buf rx_rb, tx_rb;
+
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+    bool poll;
+    struct k_work tx_work;
+    struct k_timer rx_timer;
+#endif
+};
+
+void serial_handle_rx(uint32_t cmd, uint8_t *data, uint8_t len);

app/src/split/CMakeLists.txt

@@ -1,15 +1,23 @@
 # Copyright (c) 2022 The ZMK Contributors
 # SPDX-License-Identifier: MIT
 
-if (CONFIG_ZMK_SPLIT_BLE AND (NOT CONFIG_ZMK_SPLIT_ROLE_CENTRAL))
-  target_sources(app PRIVATE listener.c)
-  target_sources(app PRIVATE service.c)
+if (NOT CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
+  if (CONFIG_ZMK_SPLIT_BLE OR CONFIG_ZMK_SPLIT_SERIAL)
+    target_sources(app PRIVATE listener.c)
+    target_sources(app PRIVATE service.c)
+  endif()
 endif()
 
-if (CONFIG_ZMK_SPLIT_BLE AND CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
-  target_sources(app PRIVATE central.c)
+if (CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
+  if (CONFIG_ZMK_SPLIT_BLE OR CONFIG_ZMK_SPLIT_SERIAL)
+    target_sources(app PRIVATE central.c)
+  endif()
 endif()
 
 if (CONFIG_ZMK_SPLIT_BLE)
     add_subdirectory(bluetooth)
 endif()
+
+if (CONFIG_ZMK_SPLIT_SERIAL)
+    add_subdirectory(serial)
+endif()

app/src/split/Kconfig

@@ -18,6 +18,10 @@ config ZMK_SPLIT_BLE
     select BT_USER_PHY_UPDATE
     select BT_AUTO_PHY_UPDATE
 
+config ZMK_SPLIT_SERIAL
+    bool "Serial"
+    select RING_BUFFER
+
 endchoice
 
 config ZMK_SPLIT_PERIPHERAL_HID_INDICATORS
@@ -30,3 +34,4 @@ config ZMK_SPLIT_PERIPHERAL_HID_INDICATORS
 endif
 
 rsource "bluetooth/Kconfig"
+rsource "serial/Kconfig"

app/src/split/serial/CMakeLists.txt

@@ -0,0 +1,8 @@
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+if (CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
+  target_sources(app PRIVATE central.c)
+endif()
+
+target_sources(app PRIVATE serial.c)

app/src/split/serial/Kconfig

@@ -0,0 +1,21 @@
+if ZMK_SPLIT && ZMK_SPLIT_SERIAL
+
+menu "Serial Transport"
+
+config ZMK_SPLIT_SERIAL_UART
+    bool "Serial over UART"
+    default y
+
+# TODO TODO TODO once on 3.5/3.6, can default to
+# DT_HAS_RASPBERRYPI_PICO_UART_PIO_ENABLED and BOARD_NATIVE_SIM
+config ZMK_SPLIT_SERIAL_UART_POLLING
+    bool "Serial over UART Polling API"
+    default n
+
+config ZMK_SPLIT_SERIAL_CDC_ACM
+    bool "Serial over USB CDC ACM"
+    default n
+
+endmenu
+
+endif

app/src/split/serial/central.c

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <zephyr/kernel.h>
+
+#include <zmk/split/serial/serial.h>
+#include <zmk/events/position_state_changed.h>
+
+// TODO TODO TODO
+#include <zephyr/logging/log.h>
+LOG_MODULE_DECLARE(slicemk);
+
+#define POSITION_STATE_DATA_LEN 16
+static uint8_t position_state[POSITION_STATE_DATA_LEN];
+static uint8_t changed_positions[POSITION_STATE_DATA_LEN];
+
+static void serial_handle_bitmap(uint8_t *data, uint8_t len) {
+    for (int i = 0; i < POSITION_STATE_DATA_LEN; i++) {
+        changed_positions[i] = ((uint8_t *)data)[i] ^ position_state[i];
+        position_state[i] = ((uint8_t *)data)[i];
+        LOG_DBG("TODO TODO TODO data: %d", position_state[i]);
+    }
+
+    for (int i = 0; i < POSITION_STATE_DATA_LEN; i++) {
+        for (int j = 0; j < 8; j++) {
+            if (changed_positions[i] & BIT(j)) {
+                uint32_t position = (i * 8) + j;
+                bool pressed = position_state[i] & BIT(j);
+
+                // TODO TODO TODO does zero make sense? check ble central. what
+                // slot is central itself?
+                int slot = 0;
+
+                struct zmk_position_state_changed ev = {.source = slot,
+                                                        .position = position,
+                                                        .state = pressed,
+                                                        .timestamp = k_uptime_get()};
+                zmk_position_state_change_handle(&ev);
+            }
+        }
+    }
+}
+
+void serial_handle_rx(uint32_t cmd, uint8_t *data, uint8_t len) {
+    switch (cmd) {
+    // Handle split bitmap transformed (bst) version 0.
+    case 0x73627400:
+        serial_handle_bitmap(data, len);
+        break;
+
+    default:
+        LOG_ERR("Received unexpected UART command 0x%08x", cmd);
+        break;
+    }
+}
+

app/src/split/serial/serial.c

@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <zephyr/device.h>
+#include <zephyr/drivers/uart.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/sys/crc.h>
+
+#include <zmk/split/serial/serial.h>
+
+// TODO TODO TODO
+#include <zephyr/logging/log.h>
+LOG_MODULE_REGISTER(slicemk);
+
+#define SERIAL_MSG_PREFIX "UarT"
+
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+K_THREAD_STACK_DEFINE(uart_tx_wq_stack, 256);
+static struct k_work_q uart_tx_wq;
+#endif
+
+static struct serial_device serial_devs[] = {
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART
+    {
+        .dev = DEVICE_DT_GET(DT_CHOSEN(zmk_split_uart)),
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+        .poll = true,
+#endif
+    },
+#endif
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_CDC_ACM
+    {
+        .dev = DEVICE_DT_GET(DT_CHOSEN(zmk_split_cdc_acm)),
+    },
+#endif
+};
+
+#define CONFIG_ZMK_SPLIT_SERIAL_COUNT ARRAY_SIZE(serial_devs)
+
+static bool serial_callback_tx(struct serial_device *ud) {
+    // Read data from buffer. Stop transmitting if buffer is empty.
+    uint8_t data[32];
+    int len = ring_buf_peek(&ud->tx_rb, data, sizeof(data));
+    if (len == 0) {
+        return true;
+    }
+
+    // Write data to UART and remove number of bytes written from buffer.
+    int ret = uart_fifo_fill(ud->dev, data, len);
+    if (ret < 0) {
+        LOG_ERR("failed to fill UART FIFO (err %d)", ret);
+        return true;
+    }
+    ring_buf_get(&ud->tx_rb, data, ret);
+    return false;
+}
+
+static void serial_callback_rx_internal(struct serial_device *sd) {
+    // Continue processing data as long as the buffer exceeds the header length
+    // (13 bytes).
+    uint8_t data[512];
+    while (ring_buf_peek(&sd->rx_rb, data, 13) >= 13) {
+        // Discard single byte if prefix does not match.
+        if (memcmp(data, SERIAL_MSG_PREFIX, strlen(SERIAL_MSG_PREFIX))) {
+            uint8_t discard;
+            ring_buf_get(&sd->rx_rb, &discard, 1);
+            continue;
+        }
+
+        // Stop processing if message body is not completely buffered.
+        int len = data[12];
+        int total = len + 13;
+        if (ring_buf_size_get(&sd->rx_rb) < total) {
+            return;
+        }
+
+        // Check message checksum and handle message.
+        uint32_t cmd, crc;
+        ring_buf_get(&sd->rx_rb, data, total);
+        memcpy(&cmd, &data[4], sizeof(cmd));
+        memcpy(&crc, &data[8], sizeof(crc));
+        if (crc == crc32_ieee(&data[13], len)) {
+            serial_handle_rx(cmd, &data[13], len);
+        } else {
+            LOG_ERR("received UART message with invalid CRC32 checksum");
+        }
+    }
+}
+
+static void serial_callback_rx(struct serial_device *sd) {
+    uint8_t c;
+    while (uart_fifo_read(sd->dev, &c, 1) == 1) {
+        ring_buf_put(&sd->rx_rb, &c, 1);
+    }
+    serial_callback_rx_internal(sd);
+}
+
+static void serial_callback(const struct device *dev, void *data) {
+    if (uart_irq_update(dev)) {
+        struct serial_device *ud = data;
+
+        if (uart_irq_tx_ready(dev)) {
+            // If transmission complete, disable IRQ until next transmission.
+            bool complete = serial_callback_tx(ud);
+            if (complete) {
+                uart_irq_tx_disable(dev);
+            }
+        }
+
+        // TODO TODO TODO lookup index in serial_devs array for slot ID?
+        if (uart_irq_rx_ready(dev)) {
+            serial_callback_rx(ud);
+        }
+    }
+}
+
+void serial_write(struct serial_device *sd, uint32_t cmd, uint8_t *data, uint8_t len) {
+    // TODO TODO TODO use buf with size SERIAL_BUF_SIZE. do single
+    // ring_buf_put() to avoid potential race
+    uint8_t header[13] = SERIAL_MSG_PREFIX;
+    memcpy(&header[4], &cmd, sizeof(cmd));
+    uint32_t crc = crc32_ieee(data, len);
+    memcpy(&header[8], &crc, sizeof(crc));
+    header[12] = len;
+    ring_buf_put(&sd->tx_rb, header, sizeof(header));
+    ring_buf_put(&sd->tx_rb, data, len);
+
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+    if (sd->poll) {
+        k_work_submit_to_queue(&uart_tx_wq, &sd->tx_work);
+        return;
+    }
+#endif
+
+    uart_irq_tx_enable(sd->dev);
+}
+
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+
+static void serial_tx_work_handler(struct k_work *work) {
+    struct serial_device *sd = CONTAINER_OF(work, struct serial_device, tx_work);
+    uint8_t c;
+    while (ring_buf_get(&sd->tx_rb, &c, sizeof(c))) {
+        uart_poll_out(sd->dev, c);
+    }
+}
+
+static void serial_rx_timer_handler(struct k_timer *timer) {
+    struct serial_device *sd = CONTAINER_OF(timer, struct serial_device, rx_timer);
+    uint8_t c;
+    while (uart_poll_in(sd->dev, &c) == 0) {
+        ring_buf_put(&sd->rx_rb, &c, sizeof(c));
+    }
+    serial_callback_rx_internal(sd);
+}
+
+#endif
+
+static int serial_init() {
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+    // TODO TODO TODO define kconfig for prio. nrf52 max 14.
+    struct k_work_queue_config uart_tx_cfg = {.name = "uart_tx_wq"};
+    k_work_queue_start(&uart_tx_wq, uart_tx_wq_stack, K_THREAD_STACK_SIZEOF(uart_tx_wq_stack), 14, &uart_tx_cfg);
+#endif
+
+    for (int i = 0; i < CONFIG_ZMK_SPLIT_SERIAL_COUNT; i++) {
+        struct serial_device *sd = &serial_devs[i];
+        if (!device_is_ready(sd->dev)) {
+            LOG_ERR("failed to get serial device %s", sd->dev->name);
+            return 1;
+        }
+
+        // Initialize ring buffer.
+        ring_buf_init(&sd->rx_rb, sizeof(sd->rx_buf), sd->rx_buf);
+        ring_buf_init(&sd->tx_rb, sizeof(sd->tx_buf), sd->tx_buf);
+
+#ifdef CONFIG_ZMK_SPLIT_SERIAL_UART_POLLING
+        if (sd->poll) {
+            k_timer_init(&sd->rx_timer, serial_rx_timer_handler, NULL);
+            k_timer_start(&sd->rx_timer, K_NO_WAIT, K_TICKS(1));
+            k_work_init(&sd->tx_work, serial_tx_work_handler);
+            continue;
+        }
+#endif
+
+        // TODO TODO TODO iirc need to check return function in zephyr 3.5
+        uart_irq_callback_user_data_set(sd->dev, serial_callback, sd);
+        uart_irq_rx_enable(sd->dev);
+    }
+
+    return 0;
+}
+
+SYS_INIT(serial_init, APPLICATION, 0);