Skip to content

(Optional) EEG visualization setup

Jump to bottom
Laetitia Fesselier edited this page May 2, 2023 · 1 revision

EEG visualization components require Protocol Buffers v3.0.0 or higher. You can install it with the command sudo apt install protobuf-compiler. For other install options, you can refer to the Protocol Buffers GitHub page: https://github.com/protocolbuffers/protobuf.

To enable the visualization components, set the useEEGBrowserVisualizationComponents config (Configuration/GUI) to true and run make dev or npm install && npm run compile from the loris root directory.

Home | About | Community | Setup | Technical

Clone this wiki locally