4.9.1

• Updated Software Installer
  • Added UnityFuncDumper
  • Added UE4cfgdumper
  • Added Battery Desync Fix NX
  • Added NX-FanControl
  • Added DBI (English, Portuguese, Russian)
  • Updated Picofly Firmware installer
• Updated System Tweaks
  • Added entire DBI folder in the exceptions for AIO, you can block not only the config, but also the version
• Updated Status Monitor Overlay 1.1.3 (fork)

UPD. Deleted Info NX & Observer-Tool overlays. For two reasons:

1. Conflict with NX-FanControl
2. Prevents duplication, all features already exist in the Status Monitor & Sys-Clk

4.9.0

• Updated SwitchCraft 1.4.0
  • New timing schema presets for primary timings & additional secondary timings
  • GPU UV1 reworked (Mariko)
  • 1305 MHz is now only available with GPU UV2 & 3 (Mariko)
  • New CPU option “Table Config” (Mariko)
• Updated Sys-clk-oc & MemToolkitNX
  • RAM timing configuration reading
• Updated SC Wizard
  • SC 1.4.0 compatibility
  • Help for Table Config (press Y inside menu)
  • New timings schema & presets compatibility
  • AUTO_ADJ_LV has been removed
• Updated FPSLocker 2.0.1 (fork)
• Updated Status Monitor Overlay 1.1.2 (fork)

UPD. Fixed CPU Table Config bug

4.8.0

• Updated SwitchCraft to 1.3.7
  • The default max CPU frequency is now 1963 MHz when no UV is selected
  • GPU UV 2 fine tuning
    • The voltage at 1075 MHz has been slightly increased for higher speedos
• Updated SC Wizard
  • New Micron WT:B timing presets
  • Updated presets with HP (high performance) timings

4.7.2

• Updated SwitchCraft
  • CPU max freq support
    • 1963 / 2379 / 2601 (Mariko)
    • 2091 / 2295 (Erista)
• Updated SW Wizard
  • Compatibility
  • Refactoring
  • Updated Help

4.7.1

• Updated SwitchCraft to 1.3.5 (re-uploaded)
  • CPU voltage range has been expanded
    • 900 mv - 1235 mv
• Updated SC Wizard
  • SC 1.3.5 compatibility

4.7.0

• Updated SwitchCraft to 1.3.5
  • Additional Auto DVB (SoC) voltage steps
  • Two negative DVB steps to reduce the SoC voltage for higher speedos (1633+ MHz)
  • The max CPU voltage limit can be increased to 1235 mV
• Updated SC Wizard
  • SC 1.3.5 compatibility
• Updated Status Monitor Overlay to 1.1.2

4.6.7

• Updated SaltyNX to 0.9.2
• Updated Status Monitor Overlay to 1.1.1
• Updated MemToolkitNX to 1.1.0
  • Exits only when pressing B
  • Dram volt reading
  • Dram id reading
  • RAM timing cfg reading (not working yet)

4.6.6

• Updated SC Wizard
  • Refactoring
  • Updated Help for all parameters (press Y inside menu)
  • Reduced GPU voltage range to 850
  • Fixed UV levels for Mariko
    • UV 1-8, High Freq UV 1-12
• Updated Software Installer
  • Updated Help for all apps (press Y inside menu)

4.6.5

• Updated Switchcraft to 1.3.4
  • An additional DVB step
  • GPU UV 2 fine tuning (The voltage is now slightly reduced at 1267 MHz)
  • CPU high Freq UV 1-12
    A good game to test CPU UV is “Need for Speed: Hot Pursuit”
    It crashes in the main menu on the map if CPU UV is unstable
• Updated SC Wizard
  • SC 1.3.4 compatibility
  • Timing presets (Samsung, Micron, Hynix)
    • Check your RAM type in the InfoNX overlay
    • After applying the preset, go back to the RAM section to refresh package
  • New default GPU UV3 tables
  • Lower tRAS values
  • RAM Vddq voltages has been extended
    • 370 - 700 mV
  • Small visual changes and bug fixes
• Updated Software Installer
  • Added NX-Activity-Log app
  • Added TOTK UltraCam uberhand package

4.6.4

• Updated Switchcraft to 1.3.3
  • Opportunity to lock/unlock CPU max clock
    • 2601 (Mariko)
    • 2295 (Erista)
  • New RAM HP Mode
    • It increases performance and bandwidth but also power and temperature
  • RAM Vddq extended voltages
    • 370 - 650 mV (Mariko)
  • AUTO_ADJ_HP was removed from DRAM Timings because of worse gaming performance
• Updated SC Wizard
  • SC 1.3.3 compatibility
  • Extended Vdd2 voltages for Erista
  • Refactoring
• Updated TegraExplorer to 4.2.0
• Updated Hekate v6.2.1 & Nyx v1.6.3