5.0.4

• Updated Status Monitor Overlay 1.1.6
• Updated SaltyNX 1.0.6

5.0.3

• Updated Status Monitor to 1.1.5 (hanai3Bi fork)
• Updated Update SaltyNX to 1.0.0 (fork)
• Updated ReverseNX-Tool to 3.2.0
• Updated System Tweaks
  • Status Monitor
    • Average GPU Load

An alternative link to the NX-Venom project: https://gitverse.ru/CatcherITGF/NX-Venom

5.0.2

• Updated sys-patch to 1.5.4
• Updated Edizon overlay to 1.0.9

The list of apps from Software Installer that has been updated to support AMS 1.8.0 / HOS 19.0.0:

• DBI (ru, btbr)
• linkalho
• MissionControl
• NX-Activity-Log
• NX-FanControl
• QuickNTP

5.0.1

• Updated Sys-Clk-OC 1.1.1
• Updated Status-Monitor (hanai3bi fork)
  • Compatible with latest Sys-Clk-OC
  • Updated config file
• Updated Tinfoil to applete version

Not included in the bundle:

• Updated HB Menu forwarder (download)
• Added Tinfoil forwarder (download)

Thanks to @AlM2025

5.0.0

HOS 19.0.0 support with backward compatible for previous firmware versions has been added to NX-Venom

WARNING!
Some system modules may not be adapted to the new firmware. Be prepared for the fact that some of the apps from the Software Installer may not work yet.

• Updated Atmosphère 1.8.0
• Updated Hekate v6.2.2 & Nyx v1.6.4
• Updated sys-patch
• Updated Lockpick_RCM 1.9.13 (FW 19) Zoria
• Updated SaltyNX 0.9.4 (fork)
• Updated FPSLocker 2.0.3 (fork)
• Updated Status Monitor Overlay 1.1.4 (hanai3Bi fork)
• Updated Linkalho 2.0.1
• Updated Switchcraft 1.5.0
  • Atmosphere 1.8.0 compatible
  • Timing presets updated
• Updated SC Wizard
  • Switchcraft 1.5.0 compatible
  • Some timing presets updated
  • Fix color label for CPU Max Freq (Mariko)
• Updated 8GB patches for modded consoles

Known bugs:

• Tinfoil does't support the latest AMS
• The replacement of the User Page feature in NX-Activity-Log does not work on the latest AMS
• In general, NSP forwarders created for FW 18.x.x will not work with the latest AMS

4.13.1

• Updated Software Installer
  • Added ModCD
    • HB app for games mods management
    • Works only in non-applet mode
• Added SaltyNX exception for Zelda EoW to prevent crashes on exit

4.13.0

• Updated Switchcraft to 1.4.4
  • One timing fix for all switches
  • Dual rank timing fix for Erista & 8GB Mariko
  • Auto GPU vmin accuracy improved
  • NO_ADJ removed
  • 1.4.3 HP Mode = 1.4.4 AUTO_ADJ_HP
• Updated SC Wizard
  • Timing presets updated
  • HB-MGCH & AB-MGCL ST timing preset added
• Updated Software Installer
  • Added BT Audio overlay
• Fixed an issue where FPS Locker patches were not updated when updating Venom

4.12.0

• Updated Switchcraft EOS 1.4.3
  • Timing fixes
    • T5 has been reduced to 5 for Erista
  • An additional negative DVB step for Mariko
• Updated SC Wizard
  • Switchcraft 1.4.3 compatibility
  • Refactoring

4.11.0

• Updated Switchcraft to 1.4.2
  • CPU Table Mode "Auto": Optimized for higher speedos
  • New CPU Table modes:
    • Shift Fix 1: Prevents a table shift
    • Shift Fix 2: Prevents a table shift and slightly lowers mid-freq voltages
  • Updated default CPU Max Freq for Mariko (1963 MHz)
  • Updated default CPU Volt Limit (1120 mV)
  • Updated default timings, T6 set to zero for properly Erista support "out of box"
  • HP Mode enabled by default
• Updated Uberhand to 2.3.1
• Updated Status Monitor to 1.1.3 (meha's fork)
  • Added option for showing load/temperature on FPS Graph display
• Updated SC Wizard
  • Switchcraft 1.4.2 compatibility
  • Full OC Documentation (special thanks @dominatorul & @ChanseyIsTheBest)
  • Updated Kip Management
  • Enabled scrolling of menus and text with right stick
  • Updated GPU Custom Table menu, sliders support (press "A" to change a value)
  • Help refactoring
• Updated System Tweaks
  • AIO
    • Splash screen support for Hekate option to prevent from overwrite (bootlogo.bmp)
    • All configs support (SD:/configs folder)
  • Show Config for some options allows you to read configs directly from the overlay

4.10.0

• Updated SwitchCraft EOS to 1.4.1 pre-release
  • Timings for 8GB ram chips (allows to take the higher frequency or reduce the voltage)
  • High freq vmin validator minimum has been changed to 710 mV
  • An additional CPU Max step 2499 MHz
  • Improved compatibility in the CPU Table mode “Auto” (it allows lower High Freq Vmin when previously only 750 mV was stable)
• Updated Sys-Clk-OC to 1.0.1
• Updated Status Monitor to 1.1.3 (meha's fork)
  • Real Temp support
  • RAM voltages refactoring
• Updated SC Wizard
  • 1.4.1 pre-release compatibility
  • Timing Presets adjusted slightly for better performance
  • HP timings renamed to Strong Timings
  • Updated Help for Timing Presets
• Updated System Tweaks
  • Status monitor Real Volt, Real Temp & Full CPU support