3.0.0

• Updated OC-Suite to EOS 0.2
  • Switch OC Suite name is now changed to EOS
  • Cust Adj is removed and Timing calculation fixes
  • Now 0 is default timing and 1+ is reduced timing
  • Reverted CPU max volt patch and cpu volt can go over 1120
  • Timing T3 for testing purposes only
  • Removed CPU UV1
• Updated OC-Suite Wizard to EOS Wizard
  • Added EOS 0.2 support
  • Added warning colours (orange and red) for ram timings
• Added FPS Locker patches to the bundle

Do not use timings of previous versions. Keep in mind that any T3 values may be unstable.

2.3.2

• Updated Sys-Clk-OC to oc4
  • Better cpu volt bug fix (can't fix if cpu volt bug happens during boost mode)
  • Adjusted auto cpu boost threshold to 90%
  • Miscellaneous tab is added in overlay for toggling config
  • 'allow unsafe freq' config is now removed since protections is added in loader
• Updated OC-Suite Wizard
  • Added cust_rev cheacker
  • Fix error, remove unsupported Vdd2 values
• Updated System Tweaks
  • Remove Sys-Clk-OC settings, duplicate overlay feature

2.3.1

• Updated OC-Suite Wizard
  • Fix bug with 0 values

2.3.0

Updated to OC-Suite 2.0.0 RC6

• Fixed possible overflow of ram timing values. this will enable higher freq or increase perf if overflow was happening
• Fixed cpu/gpu min/max voltage patching, and now does proper patching with proper checks. this fixes patching values unrelated to voltage
• Added cpu vmin customization for erista/mariko and cpu 'tune high vmin' for mariko. also cpu/gpu vmin for mariko will be automatically patched for uv like previous version if you don't enable vmin (0 means don't enable)
• GPU vmax is patched to 800mV for safety (can be changed in configurator). so your max gpu freq will be automatically adjusted
• Real cpu max voltage is not patched, so cpu voltage will not go over 1120mV for safety (so depending on your speedo, real 2397 might not be possible on uv1-2). you can still adjust cpu max volt in configurator to tune cpu volt
• Max vdd2 voltage is lowered to 1212.5mV for safety
  Updated Sys-Clk-OC 2.0.0-rc4 to test version 2
• Fixed boost mode not working
• Attempt to make auto cpu boost work
  Updated OC-Suite Wizard
• Support OCS 2.0.0 RC6
• Refactoring

2.2.1

• Updated Sys-Clk-OC to 2.0.0-rc4
• Updated FPSLocker to 1.2.6a
• Updated Status Monitor to 1.0.3
• Updated DBI to 658
• Updated Uberhand
  • Fixed ini-val
• Updated OC-Suite Wizard
  • Fixed RAM voltage units

2.2.0

• Rebranded to NX Venom
• Updated OC-Suite Wizard
  • Added help (press Y in specific menus)
• Updated Software Installer
  • Added sys-ftpd
  • Added QuickNTP
  • Added dvr-patches
  • Added help (press Y in specific menus)
• Updated System Tweaks
  • Temporarily disable Background Services
  • Added help (press Y in specific menus)
• Added Tesla config to fix key-combo issue
• Updated Uberhand
• Updated DBI to 655
• Removed sys-ftpd from defaults

Added action autobuild, thanks to @khmm12 for contribution

2.1.0

• Updated OC-Suite Wizard
  • Refactoring
  • Moved from hex to dec values
  • Fix Erista RAM freqs
• Updated System Tweaks
  • Refactoring
  • Added MemToolkitNX
• Updated Software Installer
  • Added JKSV
• Updated Uberhand to 2.1.2 (beta)
• Updated DBI to 654
• Updated MemToolkitNX to 1.0.1

2.0.0

• Replaced Ultrahand with Uberhand
  • Sort overlays and packages via +/-
  • Shows current value in front of menu items
  • Jump to current feature
  • Navigation improvements (use L/R, ZL/ZR buttons)
• Replaced OC-Suite Configurator with OC-Suite Wizard
  • Full support official OS-Suite
  • Full support Mariko and Erista
• Replaced System Settings with System Tweaks
  • Added Uberhand settings
  • Added Fan Tuning sliders
  • Added Background services management
• Updated loader.kip
  • New default timings values
• Updated FPSLocker to 1.2.6
• Added homebrew Tinfoil installer v17.0 with liberashop support
• Updated DBI to 653
• Updated AIO to 2.23.2
• Added sysnand no kip boot config
• Removed mhz (deprecated)

Special thanks to @efosamark and @i3sey for help with this release

1.5.4

• Updated OC-Suite Configurator to 1.4.4
  • Remove unsafe ram freqs
• Updated DBI to 652
• Updated Sys-Clk-OC to 2.0.0-rc3hhh
  • Fix issue where power readings could sometimes show garabe value of 0
• Removed stress-nx.nro (duplicate functionality MemToolkitNX)
• Updated System Settings
  • Fixed Status Monitor key combo bug
• Updated Software Installer to 2.1.0
  • Added Linkalho, SysDVR, Studious Pancake, emuiibo and Amiigo to software list
  • Added uninstall feature

1.5.3

• Updated Sys-Clk-OC to 2.0.0-oc3h
  • Fixed resetting to stock apm values on perf conf id change
  • Optimized voltage/power readings
  • Adjusted overlay UI to look better
• Updated OC-Suite Configurator to 1.1.3
  • Removed Fan Curve to separate package
• Added System Settings package to UltraHand overlay
  • Sys-Clk-OC
  • Status Monitor
  • Fan Curve
  • System Video Recorder
  • Clear AMS Report Logs
• Removed MemTesterNX (duplicate functionality MemToolkitNX)