Skip to content

IG800 Ground Station Main board

Jump to bottom
mefistotelis edited this page Sep 22, 2019 · 4 revisions

Table of Contents

Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics

Function

The Ground Station Main board contains everything needed to recive and decode Lightbridge communication. There is RF transciever and video decoder on it.

Variants

Known versions of the board are listed below.

Marking Overview
IG800_GPS_V1

Parts

Marking Amt. Pkg. Function Specification
TODO

Programming

Chips Firmware Description
DM3xx, IS43DR?, MX30LF1G/MT29F1G? m0800 Live feed video decoder.

External interfaces

Marking Overview
TODO

Service interfaces

The following service pads exist on this board:

Marking Overview
TODO

Board view

Top of a IG800_GPS_V1 board:

IG800 Ground Station Main board v1 A top

Bottom of the IG800_GPS_V1 board:

IG800 Ground Station Main board v1 A bottom

Top of another IG800_GPS_V? board:

IG800 Ground Station Main board v2 A top

Bottom of the IG800_GPS_V? board:

IG800 Ground Station Main board v2 A bottom

Schematics

No schematics available.

This page is created by drone enthusiasts for drone enthusiasts.

If you see a mistake, or you know more about specific subject, or you see an area for improvement for the wiki - create an issue in this project and attach your patch (or describe the change you propose).

Clone this wiki locally